step 2: instructions and contact info
Procedure for
removing the roof console assembly (Tacoma):
1.)
Remove the screw inside the sunglasses compartment. (1 Philips head
screw)
2.)
Disengage the 2 clips and 3 plastic claws. Oddly, the locking claws are
on the screw end of the console, so you must to gently
pull
down on the
end closest to the
windshield where the two clips are. Be
careful, it can 'pop' out
suddenly. Go slow and make sure you don't yank out the wiring.
We aren't responsible for damage to your truck or
to
you!
3.)
Disconnect the accessory meter connector and map lamp connector.
Optionally,
you can then removed the 3 T10 size torx screws that hold the display
screen
(accessory meter) in, and remove it from the console so you will have a
(much) smaller part to ship.
Printable removal instructions here (pdf)
Almost there! Now box it up and ship it to:
|
Logicwire
Services 620 Saluda Avenue Columbia, SC 29205 |
Printable shipping instructions here (pdf)
*overnight return shipping available for $35
Be sure to include contact information or a business card (preferably with an email address) in the box. Prepay using the button on the right of the page, or include a check/money order...or you can wait until it is repaired to pay. (we will email you.) We completely understand your hesitation in pre-paying, let alone sending your expensive part. That's why we are so flexible with our payment terms. We understand! :)
If you need a replacement metal clip for your Tacoma, please include one dollar ($1) per clip in the box in an envelope (see FAQ for more info) Thanks for your business...we have the trust of many very happy clients!
Please note: if you opt for 'Signature Required' on your shipping package, it may take up to a week longer to get your repair back to you. (We often miss the UPS/Fedex/mailman delivery times) Our mail drop is safe and secure, so no signature required...but we understand if you opt for it!
